Translate

Left or Right Exhaust Temperature - Abnormal Signal (Diagnostic Code: SPN 1180 - FMI 8 / SPN 1181 - FMI 8)

SPN1180 FMI8 / SPN1181 FMI8
Left or Right Exhaust Temperature - Abnormal Frequency, Pulse Width, or Period 
Figure 1.1 - SPN 1180 FMI 8 (Murphy PowerView)

Pulse Width Modulated (PWM) Sensor
The PWM sensors provide a signal to the Engine's ECM for certain engine operating conditions. The sensors receive a 8.0 ± 0.4 VDC regulated voltage from the ECM.

The sensor's wires are routed from the ECM to the sensor connectors. The following list gives the terminal locations for the sensor connector.
  • Terminal A = 8 VDC Supply
  • Terminal B = Sensor Return
  • Terminal C = Sensor Signal
The ECM provides short circuit protection for the internal power supply. A short circuit to the Battery will not damage the internal power supply.

#Troubleshooting:
1). Check for an Active Diagnostic Code
A. Connect Caterpillar Electronic Technician (ET) to the Service tool connector. Read More: How to Connecting Caterpillar ET Software to the ECM.
B. Monitor the Diagnostic Codes on CAT ET. Check and record any Diagnostic Codes.
Figure 1.2 - Active Codes (827-8/ 828-8)

Code and Description:
  • 827-8 (SPN 1180 - FMI 8) Left Exhaust Temperature Sensor abnormal frequency, pulse width, or period.
  • 828-8 (SPN 1181 - FMI 8) Right Exhaust Temperature Sensor abnormal frequency, pulse width, or period
Conditions which Generate this Code:
The Electronic Control Module (ECM) detects a sensor frequency that is greater than 1000 Hz or less than 150 Hz. The ECM detects a duty cycle that is greater than 90 % or a duty cycle that is less than 10 %.
System Response:
The value of the parameter is set to zero. The code is logged. Read More: Sensor Diagnostics on Electronic Engines.

2). Check the Digital Supply Voltage at the Sensor Connector
A. Disconnect the suspect sensor(s) at the sensor connector.
B. Turn the main disconnect switch to the ON position.
C. Measure the voltage on the ECM side of the sensor connector between pin A and pin B (also pin B and pin C) for the suspect sensor(s).
Expected Result: The supply voltage is 8.0 ± 0.4 VDC. If OK - The supply voltage at the ECM is correct. There's a problem with sensor(s) connector, wiring harness or the sensor(s).

3). Check the Sensor's Duty Cycle at the Sensor Connector
A. Measure the duty cycle between the sensor's signal wire (pin C) and pin B of the sensor connector.
→Set the multimeter to "VDC" and press the "Hz" button twice so that the % symbol is displayed.
Expected Result: The duty cycle is between 10 to 90 percent. If Not OK - Replace the sensor(s), with CAT P/N: 163-7882.
Figure 1.3 - Exhaust Temp Sensor (3512C)

#Trip points for the Monitoring System
The Monitoring System determines the level of action that is taken by the Electronic Control Module (ECM) in response to a condition that can damage the Engine. When any of these conditions occur, the appropriate Event Code will trip.
Figure 1.4 - High Exhaust Temperature


Read More:
How to Setting new CAT Messenger Display?
How to Setting or Testing the Engine Overspeed using Caterpillar ET?









Blog.Teknisi

Subscribe to receive free email updates:

12 Responses to "Left or Right Exhaust Temperature - Abnormal Signal (Diagnostic Code: SPN 1180 - FMI 8 / SPN 1181 - FMI 8)"

  1. It is a great website.. The Design looks very good.. Keep working like that!. climate chambers

    ReplyDelete
  2. nice post bossqu, hope you create article about critical sensor on engine in the next post.. :D

    ReplyDelete
  3. The science and the technology of foretelling the state of the atmosphere in the future in a particular place is known as weather forecasting. The Human race has been attempting to predict the weather from the beginning of civilization but only since at least the nineteenth century has this been done in a formal fashion. Barrackpore

    ReplyDelete
  4. I love visiting sites in my free time. I have visited many sites but did not find any site more efficient than yours. Thanks for the nudge! Learn to Trade Forex

    ReplyDelete
  5. Excellent post. I was reviewing this blog continuously, and I am impressed! Extremely helpful information especially this page. Thank you and good luck. Best Binary options Broker Reviewed

    ReplyDelete
  6. buy twitch followers Superheroes battle monsters and space invaders in fast action games. Players take on the role of these superheroes in epic battles. In other games players race cars, boats, motorcycles, helicopters and planes against villains and even less evil opponents to win high stakes races. Game titles such as Burnout3: Takedown, ESPN, NHL - 2K5, Silent Hill 4: The Room, Terminator 3: The Redemption, Donkey Kong 3, and, Pokemon have joined the national lexicon as kids have flocked to the lure of electronic games.

    ReplyDelete
  7. https://www.buyyoutubesubscribers.in/2021/12/30/how-hide-subscribers-youtube/ When creating videos, your main concern should be coming up with top-notch videos as it's the first step to high YouTube video ranking. Why is that and how to create a good video for YouTube, you may ask? I'll be covering the why and how of YouTube videos quality in this post.

    ReplyDelete
  8. Excellent and very exciting site. Love to watch. Keep Rocking. ux-c2b

    ReplyDelete
  9. https://dynamichealthstaff.com/jobs-in-dubai-for-nurses It is imperative for website owners to hire the perfect SEO company to further improve their websites and avoid the risks of destroying the site or tainting the website owner's credibility. Many website owners are unaware of the dangers of employing an incompetent SEO company. Hence, they need to know some pointers on how to choose the right SEO company when hiring an SEO expert.

    ReplyDelete
  10. https://hostinglelo.in Looking to promote your website on YouTube any time soon? Well if so, now is a great time to do so! There are so many perks of YouTube marketing, and if you're not using it, then you could be missing out on a huge chunk of opportunity that can make you very profitable in your business.

    ReplyDelete
  11. Fire protection services often conduct fire safety inspections for businesses and commercial properties.
    Fire Suppression Systems

    ReplyDelete