Translate

Calibration Selection on Cummins INSITE Software (CUMMINS Engines)

Calibration Selection

Figure 1.1 - Calibration Selection (ECM Code: BC30074)

Click Calibration Selection on the Viewbar to select, view, and transfer calibrations (as Figure 1.1 above).

(1). ECM/PDD Code Search
A. To search for the latest ECM/PDD Codes: Local/ Network (Web/ Online). Input the ECM Code, and click on Search.
Figure 1.2 - ECM Code: BC30074 (Search)

ECM Code
The ECM Code is a top level number used to describe or identify an electronic ECM software calibration. The ECM code was developed to be an easier method of identifying and remembering a calibration and its history.

#How to find the ECM Code:
1). When connected to the ECM (using Cummins Insite), on the right-side above (as Figure 1.1 - BC30074.00).
2). Name Plate attached on the ECM.
Figure 1.3 - ECM Code: BC30074.00

B. Checking for calibrations updates.....
Figure 1.4 - Search the ECM Code (Web/ Online)
C. Once completed, click on "Calibration History" button, to see calibration history.
Figure 1.5 - ECM Calibration Revision History
D. Click "Save" button, to save the latest calibration files to your PC.
Figure 1.6 - Saved to Calibration Workspace

(2). ECM/PDD
To download the calibrations to an ECM and a Programmable datalink device, please select the ECM/PDD button.

#To send the calibration to the ECM, select ECM button on Calibration Selection screen, or right click on ECM Mode - Transfer to ECM. This option is not available if you are not connected to an ECM.
Figure 2.1 - Calibration Workspace: QSB3.3 - CM2150
→4988820 - ECM P/N (as Figure 1.3 above)
→BC30074.00 - Current calibration files on the ECM (as Figure 1.3 above)








Blog.Teknisi

Subscribe to receive free email updates:

0 Response to "Calibration Selection on Cummins INSITE Software (CUMMINS Engines)"

Post a Comment