Translate

FREE Cummins INSITE Software: Remote Accelerator Pedal or Lever Mode (ISX15 CM2250/ Cummins Engines)

Remote Accelerator Pedal or Lever

Figure 1.1 - Remote Accelerator Pedal or Lever Mode

#Feature Description
This feature provides the Operator a means to control the Engine from a remote location when the Remote Accelerator Cab Switch is ON.

When the Remote Accelerator is being operated, the ECM will not recognize signals from the primary accelerator unless the Remote Accelerator Override feature is enabled.
Figure 1.2 - Accelerator Pedal or Level Override

If the Remote Accelerator Override feature is enabled the ECM will use whichever accelerator value is higher. The Remote Accelerator can be configured as either a switch input or an accelerator potentiometer. Unlike the primary accelerator, the Remote Accelerator does not employ Idle Validation Switches.


#Adjustable Parameters
Figure 1.3 - Remote Accelerator Pedal or Lever

Remote Accelerator Pedal or Lever
→Select the feature name to enable or disable the feature using the dropdown list in the ECM Value column.
Remote Accelerator Pedal or Lever Mode
→Select the desired option or disable the feature using the dropdown list in the ECM Value column.


#Use Data Monitor/Logger to view parameters for monitoring the Remote Accelerator Pedal or Level Mode. Read More: Data Monitor/Logger on Cummins INSITE Software (CUMMINS Engines).
→PTO On/Off Switch (On)
Remote Accelerator Pedal or Lever Switch (On)
Remote Accelerator Position Sensor Voltage
→Percent Accelerator Pedal or Lever
→Percent Remote Accelerator Pedal or Lever
Figure 1.4 - Remote Accelerator Pedal or Lever Switch

#Additional Information
→Cruise Control/PTO Switch - ECM OEM Connector (Pin 38)
→Remote PTO Switch - ECM OEM Connector (Pin 39)
→Remote Accelerator Pedal or Lever Position Switch - ECM OEM Connector (Pin 40)
→Remote Accelerator Pedal or Lever Assembly (Signal) - ECM OEM Connector (Pin 56)


Read More:











Blog.Teknisi

Subscribe to receive free email updates:

0 Response to "FREE Cummins INSITE Software: Remote Accelerator Pedal or Lever Mode (ISX15 CM2250/ Cummins Engines)"

Post a Comment