Equipment ID (NOT PROGRAMMED) on Caterpillar ET Software

Equipment ID

Figure 1.1 - Equipment ID (Not Programmed)

Equipment ID allows the customer to enter a description into the Electronic Control Module (ECM) in order to identify the Machine, such as Model/ Unit Number. A maximum of 17 characters may be entered in the field. This Parameter is only for reference by the Customer. Note: This Parameter is not required.

#Accessing

To access the Equipment ID:

1). Connect CAT ET to the Service Tool connector. Read More: How to Connecting Caterpillar ET to the ECM.

2). Select Configuration from the Service menu, or click the Configuration Tool icon.

Figure 1.2 - Configuration Tool (F5)

3). Click on the plus [+] symbol to the left of a selected Configuration Group: ECM Identification Parameters, or click Expand All to display all of the Parameters in each Configuration Group for a selected ECM.

Figure 1.3 - Configuration (1)

Figure 1.4 - Configuration (2)

4). Highlight the Parameter to be changed: Equipment ID, and click the Change button. The Change Parameter Value dialog box is displayed. Enter the new value in the New Value text box (a text string of 17 characters or less).

Figure 1.5 - Change Parameter Value (Equipment ID)

5). Click OK to accept the new value. The Are you sure… message box will be displayed. Click Yes to change the Parameter, or click No to keep the current Parameter value. The Configuration Tool screen will be displayed.

Figure 1.6 - Are you sure... (click Yes)

Figure 1.7 - Configuration (Equipment ID)

Using Histogram on Caterpillar ET Software

Using Data Log Recorder on Caterpillar ET Software

Blog.Teknisi