FREE Caterpillar ET Software: Accessing Maintenance Indicator

Maintenance Indicator

Figure 1.1 - Service Engine (250 H Remaining)

#Purpose

The Maintenance Indicator function provides information concerning maintenance needs. The data displayed on this screen indicates the status of maintenance in the ECM.

#Accessing

To run the Maintenance Indicator function:

1). Connect CAT ET to the Service Tool connector. Read More: How to Connecting Caterpillar ET Software to the ECM.

2). Select Maintenance Indicator from the Service menu.

Figure 1.2 - Maintenance Indicator (Service)

3). The Maintenance Indicator screen is displayed.

Figure 1.3 - Maintenance Indicator (Unavailable)

*Note: If the Numeric Value is Unavailable, please go to Configuration Tool (F5) then Maintenance Parameters sub-menu.

Figure 1.4 - Maintenance Parameters (Off)

→Maintenance Indicator Mode

Setting to: Auto-Fuel, Auto-Hour, Man-Fuel, or Man-Hour.

Figure 1.5 - Maintenance Indicator Mode

→PM1 Interval

To set the PM1 Interval: Hours or Gal.

Figure 1.6 - PM1 Interval

→Click OK, and click Yes on the Are you sure... message box.

Figure 1.7 - Click Yes (1)

Figure 1.8 - Maintenance Indicator Mode (Man-Hour/ 250 Hours)

#Screen Layout

Figure 1.9 - Maintenance Indicator (Overdue)

A. Display Area

The Maintenance Indicator display area has four columns:

• Description – Provides the name of the parameter
• Service Status – Provides the maintenance status of the parameter, ie, whether maintenance is due or over due
• Value – Displays the numeric value for maintenance due
• Unit - Displays the unit of measurement for the value as defined in the Configuration tool 

B. Buttons

The button available in the Maintenance Indicator screen is:

• Reset – Click this button to reset parameter data for maintenance purposes. Doing so will prompt the Are you sure... message box. Click Yes to reset the parameters.

Figure 2.1 - Click Yes (2)

Figure 2.2 - Maintenance Indicator (Due in)

Read More:

Change the ECM Date/Time using Caterpillar ET Software

Change Measurement System using Caterpillar ET Software

Blog.Teknisi

Subscribe to receive free email updates: